ملاحظة هامة:الموقع غير مسؤول عن بيانات التواصل ومصداقية الوظائف يرجى الحذر فى التعامل

Urgently Required for KNPC Kuwaitفرص وظيفية بهيئة النفط الوطنية الكويتية

1- Inspection Engineer

=====================

Minimum qualification and experience requirements for Inspection Engineer shall be as follows:

B.Sc. in Mechanical or Metallurgical Engineering.

8 years of work experience in a large refinery/petrochemical/ fertilizer industry out of which minimum 4 years should be in inspection of running plant of oil Refinery.

Inspection Engineer shall be capable to handle basic functions including, but not limited to the following:-

• Inspects fired/unfired pressure equipment in Refinery, including steam rising plant, oil heaters, columns, vessels, heat exchangers, piping systems and storage tanks.

• Calculates permissible working pressure of equipment and reports findings.

• Prepares inspection work-lists for plant turnarounds and coordinates these functions with Engineering Maintenance, Operations and Consultant’s representatives.

• Inspects critical equipment at suppliers’ works as directed.

• Conversant with nondestructive testing methods.

• Conversant with latest API  ASME  ANSI ASTM TEMA NACE codes standards.

• Experience in RBI methodology is preferred.

Inspection Engineer served for KNPC more than 10 years may be considered as

2- Corrosion Engineer

=================

Minimum qualification and experience requirements for Corrosion Engineer shall be as follows:

B.Sc. degree in Chemical, Metallurgical or Mechanical Engineering preferably with post-graduation or industrial training in Metallurgy.

ii which minimum 4 years should be in inspection of running plant of oil Refinery.

Corrosion Engineer shall be capable to handle basic functions including, but not limited to the following:-

• Studies, monitors and reports on environmental conditions in the Refinery that cause the deterioration of metal by corrosion or a combination of corrosion and other adverse factor and recommends solutions.

• Coordinates corrosion control activities with Operations, Maintenance -Engineering and Consultants representatives.

• Shall be conversant with latest API, ASME, ANSI, ASTM-TEMA-NACE -standards.

• Experience in RBI methodology is preferred.

Corrosion Engineer served for KNPC more than 10 years may be considered as

3 - NDT Specialist

===============

English speaking experienced NDT Specialist to perform special NDT related jobs, Engineering Degree.

ASNT Level-III Certificate in any 3 NDT methods, one of them shall be Ultrasonic Testing.

Must be familiar in Radiation related issues & film interpretation.

Shall be capable of interpreting Codes, Standards, Specifications, and Procedures for Shall have knowledge in Advanced NDT Techniques (Phased Array- TOFD- IRIS- ET LRGW and MFL

4- NDT Inspector

=============

English speaking experienced NDT Inspector to perform special NDT related jobs, having at least:

Diploma in Mechanical Engineering with 10 years NDT experience.

ASNT Level-III Certification in RT- UT- MT- PTmethods.

Proficient in Eddy Current Testing, Tube Flux Leakage Testing, Remote visual inspection of Heat Exchanger Tubes, MFL Testing of Storage tank bottom plates, Ultrasonic shear wave examination of welds and Interpretation of Radiographs is essential.

AWS CWI or equivalent certification is desirable.

Five years’ experience as NDT Inspector in Refinery Petrochemical Industry is essential.

NDT Inspector served for KNPC more than 08 years may be considered as NDT Inspector based on performance.

NDT Inspector served for KNPC between 0-08 years shall be considered as NDT 5

5- Corrosion Inspector

==================

Corrosion Inspectors are assisting Unit Corrosion Engineers to collect data and submit findings for analysis & interpretation by Corrosion Engineer.

English speaking experience Corrosion Inspector to perform Corrosion related jobs, having at least:

Diploma in Chemical/Electrical Engineering with 10 years corrosion experience.

Proficient in at least Three of the following activities :

Cathodic Protection

Painting and Coating activities.

Failure Analysis related activities.

Water and Chemical Treatment activities.

Material and Metallurgy related activities.

NACE Certification or Equivalent is desirable.

Five (5) years’ experience as Corrosion Inspector in Refinery/ Petrochemical Industry is essential.

Corrosion Inspector served for KNPC more than 08 years may be considered as

6- NDT Supervisor

=================

English speaking person to supervise the activities of the Contractor, having at least:

Diploma in Mechanical Engineering with 10 years’ experience in similar position.

ASNT Level-II Certification (or equivalent) in UT, MT, RT & PT methods.

Valid Kuwaiti driving license.

Proficient in Technical Report writing and communication.

 Eight  years’ experience in supervisory level.

Five  years’ experience in Refinery / Petrochemical Industry is essential.

7- Safety Supervisor

===============

English speaking experienced person having at least:

- Diploma in Engineering with seven  years Refinery experience in safety related activities.

- Should be familiar with Health Safety- Environment Rules and Regulations.

- Valid Kuwaiti driving license

 

Please send us your update C.V by this e-mail :  gulfengineercv@gmail.com